We have achieved good success on radar solutions, e. g. the record-low power radar for vital signs and occupancy sensing, presented at ISSCC 2019*. To continue our success, we will develop key components of radar that provides small system form factor while keeping low power consumption. In such design, A single-antenna Frequency-Modulated Continuous Wave (FMCW) RF front-end design with high TX-RX isolation is promising.
* Yao-Hong Liu et. al., "A 680μW burst-chirp UWB radar transceiver for vital signs and occupancy sensing up to 15m distance," ISSCC 2019.
What you will do
FMCW radars are preferable in terms of high resolution and low sensitivity. However, due to its duplex manner, TX-RX direct coupling (spillover) is a key concern, and it is closely related to the system form factor, e. g. the physical distance between TX and RX antenna and the efficiency of antennas. To minimize both the coupling and form factor, a single-antenna, full-duplex radar front-end with high TX-RX leakage suppression will be investigated in this project.
• Literature studies on state-of-the-art FMCW radar and TX-RX leakage suppression.
• Understanding both analog and digital/system design methodologies.
• Architecture study and proposal.
• Circuit implementation.
• Layout and post-layout simulation.
What we do for you
As the world-best research institute, we have completed the unprecedented researches in Ultra Low-Power (ULP) RF transceiver field and presented in top-level conferences and journals. With the student project, you will gain the top-quality level of integrated circuit design experience.
Who you are
• You are a Msc/Bsc student.
• You are available for a period of 12 months.
• Good analytical skills (e. g. Mathematical skills).
• Good CAD skills (e. g. MATLAB/Simulink/Spectre/ADS).
• Knowledges of designing CMOS circuits.
• Knowledges of RF systems.
• Entitled to do an internship in the Netherlands.
• Motivated student eager to work independently and expand knowledge in the field.
• Good written and verbal English skills.
Click on apply to submit your application. You will then be redirected to e-recruiting.
Please be advised that non-EU/EEA country students that are studying outside of the Netherlands, need to have a work-permit to be able to do an internship in the Netherlands.